Evaluation of 5G Modulation Candidates WCP-COQAM, GFDM-OQAM, and FBMC-OQAM in Low-Band Highly Dispersive Wireless Channels

We analyse some of the candidates for modulations for 5G: FBMC-OQAM, GFDM-OQAM, and WCP-COQAM. Unlike most of the related bibliographies, which are oriented to mobile communications, our research is focused on 5G in cognitive radio based industrial wireless communications. According to the ultrareliability and low-latency requirements of industrial communications, we simulate the aforementioned modulations in low-band transmissions (carrier frequencies below 6GHz and a bandwidth narrower than 100MHz) through large indoor spaces and severe multipath channels that emulate industrial halls. Moreover, we give detailed information aboutWCP-COQAMand how the windowing affects the protection againstmultipath effect and reduces spectral efficiency compared to GFDM-OQAM.We also compare the aforementioned filtered multicarrier techniques and OFDM in terms of robustness against multipath channels, power spectral density, and spectral efficiency. Based on these results, we aim at providing an approximate idea about the suitability of 5G MCM candidates for industrial wireless communications based on CR

Novel ICI suppressing receiver for high-mobility DVB-T2 reception with large FFT modes

This paper proposes a novel framework for reducing the inter-carrier interference (ICI) caused by time-varying channels in mobile OFDM systems. The proposed ICI suppressing scheme is based on the application of the sum-product (SP) algorithm to a factor graph (FG) representing the joint a posteriori probability (APP) of the transmitted symbols. Simulation results show that this new iterative soft-input soft-output (SISO) detection strategy achieves good performance when the ICI power is high, which can be due to high mobility or the use of large FFT sizes. We discuss its application to the reception of the new DVB-T2 broadcasting standard for a set of realistic mobile scenarios

Fully Pipelined Implementation of Tree-Search Algorithms for Vector Precoding

The nonlinear vector precoding (VP) technique has been proven to achieve close-to-capacity performance in multiuser multiple-input multiple-output (MIMO) downlink channels. The performance benefit with respect to its linear counterparts stems from the incorporation of a perturbation signal that reduces the power of the precoded signal. The computation of this perturbation element, which is known to belong in the class of NP-hard problems, is the main aspect that hinders the hardware implementation of VP systems. To this respect, several tree-search algorithms have been proposed for the closest-point lattice search problem in VP systems hitherto. Nevertheless, the optimality of these algorithms has been assessed mainly in terms of error-rate performance and computational complexity, leaving the hardware cost of their implementation an open issue. The parallel data-processing capabilities of field-programmable gate arrays (FPGA) and the loopless nature of the proposed tree-search algorithms have enabled an efficient hardware implementation of a VP system that provides a very high data-processing throughput

Factor Graph Based Detection Schemes for Mobile Terrestrial DVB Systems with Long OFDM Blocks

This PhD dissertation analyzes the performance of second generation digital video broadcasting (DVB) systems in mobile terrestrial environments and proposes an iterative detection algorithm based on factor graphs (FG) to reduce the distortion caused by the time variation of the channel, providing error-free communication in very severe mobile conditions. The research work focuses on mobile scenarios where the intercarrier interference (ICI) is very high: high vehicular speeds when long orthogonal frequency-division multiplexing (OFDM) blocks are used. As a starting point, we provide the theoretical background on the main topics behind the transmission and reception of terrestrial digital television signals in mobile environments, along with a general overview of the main signal processing techniques included in last generation terrestrial DVB systems. The proposed FG-based detector design is then assessed over a simpli ed bit-interleaved coded modulation (BICM)-OFDM communication scheme for a wide variety of mobile environments. Extensive simulation results show the e ectiveness of the proposed belief propagation (BP) algorithm over the channels of interest in this research work. Moreover, assuming that low density parity-check (LDPC) codes are decoded by means of FG-based algorithms, a high-order FG is de ned in order to accomplish joint signal detection and decoding into the same FG framework, o ering a fully parallel structure very suitable when long OFDM blocks are employed. Finally, the proposed algorithms are analyzed over the physical layer of DVB-T2 speci cation. Two reception schemes are proposed which exploit the frequency and time-diversity inherent in time-varying channels with the aim of achieving a reasonable trade-o among performance, complexity and latency.Doktoretza tesi honek bigarren belaunaldiko telebista digitalaren eraginkortasuna aztertzen du eskenatoki mugikorrean, eta faktoreen grafoetan oinarritzen den hartzaile iteratibo bat proposatzen du denboran aldakorra den kanalak sortzen duen distortsioa leundu eta seinalea errorerik gabe hartzea ahalbidetzen duena. Proposatutako detektorea BICM-OFDM komunikazio eskema orokor baten gainean ebaluatu da lurreko broadcasting kanalaren baldintzak kontutan hartuz. Simulazio emaitzek algoritmo honen eraginkortasuna frogatzen dute Doppler frekuentzia handietan. Ikerketa lanaren bigarren zatian, faktoreen grafoetan oinarritutako detektorea eskema turbo zabalago baten baitan txertatu da LDPC dekodi katzaile batekin batera. Hartzaile diseinu honen abantaila nagusia da OFDM simbolo luzeetara ondo egokitzen dela. Azkenik, proposatutako algoritmoa DVB-T2 katearen baitan inplementatu da, bi hartzaile eskema proposatu direlarik seinaleak duen dibertsitate tenporal eta frekuentziala probesteko, beti ere eraginkortasunaren, konplexutasunaren eta latentziaren arteko konpromisoa mantenduz.Este trabajo de tesis analiza el rendimiento de la segunda generación de la televisión digital terreste en escenarios móviles y propone un algoritmo iterativo basado en grafos de factores para la detección de la señal y la reducción de la distorsión causada por la variación temporal del canal, permitiendo así recibir la señal libre de errores. El detector basado en grafos de factores propuesto es evaluado sobre un esquema de comunicaciones general BICM-OFDM en condiciones de transmisión propios de canales de difusión terrestres. Los resultados de simulación presentados muestran la e ciencia del algoritmo de detección propuesto en presencia de frecuencias Doppler muy altas. En una segunda parte del trabajo de investigación, el detector propuesto es incorporado a un esquema turbo junto con un decodi cador LDPC, dando lugar a un receptor iterativo que presenta características especialmente apropiadas para su implementación en sistemas OFDM con longitudes de símbolo elevadas. Por último, se analiza la implementación del algoritmo propuesto sobre la cadena de recepción de DVB-T2. Se presentan dos esquemas de recepción que explotan la diversidad temporal y frecuencial presentes en la señal afectada por canales variantes en el tiempo, consiguiendo un compromiso razonable entre rendimiento, complejidad y latencia

FPGA-Based Degradation and Reliability Monitor for Underground Cables

The online Remaining Useful Life (RUL) estimation of underground cables and their reliability analysis requires obtaining the cable failure time probability distribution. Monte Carlo (MC) simulations of complex thermal heating and electro-thermal degradation models can be employed for this analysis, but uncertainties need to be considered in the simulations, to produce accurate RUL expectation values and confidence margins for the results. The process requires performing large simulation sets, based on past temperature or load measurements and future load predictions. Field Programmable Gate Arrays (FPGAs) permit accelerating simulations for live analysis, but the thermal models involved are complex to be directly implemented in hardware logic. A new standalone FPGA architecture has been proposed for the fast and on-site degradation and reliability analysis of underground cables, based on MC simulation, and the effect of load uncertainties on the predicted cable End Of Life (EOL) has been analyzed from the results

A Diagnostics Framework for Underground Power Cables Lifetime Estimation Under Uncertainty

Power cables are critical assets for the reliable operation of the grid. The cable lifetime is generally estimated from the conductor temperature and associated lifetime reduction. However, these tasks are intricate due to the complex physicsof-failure (PoF) degradation mechanism of the cable. This is further complicated with the different sources of uncertainty that affect the cable lifetime estimation. Generally, simplified or deterministic PoF models are adopted resulting in non-accurate decision-making under uncertainty. In contrast, the integration of uncertainties leads to a probabilistic decision-making process impacting directly on the flexibility to adopt decisions. Accordingly, this paper presents a novel cable lifetime estimation framework that connects data-driven probabilistic uncertainty models with PoF-based operation and degradation models through Bayesian state-estimation techniques. The framework estimates the cable health state and infers confidence intervals to aid decision-making under uncertainty. The proposed approach is validated with a case study with different configuration parameters and the effect of measurement errors on cable lifetime are evaluated with a sensitivity analysis. Results demonstrate that ambient temperature measurement errors influence more than load measurement errors, and the greater the cable conductor temperature the greater the influence of uncertainties on the lifetime estimate

Prognostics & health management methods & tools for transformer condition monitoring in smart grids

Power transformers are critical assets for the correct and reliable operation of the power grid. However, the use of power transformers in the context of smart grids creates new challenges for efficient lifetime management and maintenance planning. The use of intermittent sources of energy and dynamic loads increases the sources of uncertainty and causes non-linear operation dynamics. In addition, the increased use of probabilistic forecasting models for the estimation of influential parameters such as temperature or load, influences the uncertainty associated with the transformer lifetime estimation. These variable operation mechanisms influence the operation and lifetime planning of power transformers. Accordingly, this paper presents a novel probabilistic health state estimation framework to improve the lifetime management of power transformers operated in smart grids through the integration of probabilistic forecasting models with Monte Carlo based Bayesian filtering methods

Factor graph based detection approach for high-mobility OFDM systems with large FFT modes

In this article, a novel detector design is proposed for orthogonal frequency division multiplexing (OFDM) systems over frequency selective and time varying channels. Namely, we focus on systems with large OFDM symbol lengths where design and complexity constraints have to be taken into account and many of the existing ICI reduction techniques can not be applied. We propose a factor graph (FG) based approach for maximum a posteriori (MAP) symbol detection which exploits the frequency diversity introduced by the ICI in the OFDM symbol. The proposed algorithm provides high diversity orders allowing to outperform the free-ICI performance in high-mobility scenarios with an inherent parallel structure suitable for large OFDM block sizes. The performance of the mentioned near-optimal detection strategy is analyzed over a general bit-interleaved coded modulation (BICM) system applying low-density parity-check (LDPC) codes. The inclusion of pilot symbols is also considered in order to analyze how they assist the detection process

Measurement Based Stochastic Channel Model for 60 GHz Mmwave Industrial Communications

Communications in the mmWave spectrum are gaining relevance in the last years as they are a promising candidate to cope with the increasing demand of throughput and latency in different use cases. Nowadays, several efforts have been carried out to characterize the propagation medium of these signals with the aim of designing their corresponding communication protocols accordingly, and a wide variety of both outdoor/indoor locations have already been studied. However, very few works endorse industrial scenarios, which are particularly demanding due to their stringent requirements in terms of reliability, determinism, and latency. This work aims to provide an insight of the propagation of 60 GHz mmWave signals in a typical industrial workshop in order to explore the particularities of this kind of scenario. In order to achieve this, an extensive measurement campaign has been carried out in this environment and a stochastic channel model has been proposed and validated